How to Maintain Your Own Swimming Pool
Keeping your swimming pool clean at all times is not a very difficult task. When talking about a pool’s preservation needs, it will depend on the kind of pool you have. If you want to keep a clean and healthy swimming pool, you need to do frequent, routine care. If you want to prevent certain issues or having damaged equipment, then you should seek guidance from a pool maintenance guide before doing anything else. If you do regular pool maintenance you will prevent annoyance and reduce the call for emergency visits to the store for chemicals. Hiring a professional to clean your swimming pool is a great idea, but you don’t just give all the responsibility to them because you still need to do a few things to ensure that your pool remains in good condition for a long time.
Check out the guidelines below when you are doing pool maintenance.
During the summer, it is beneficial if you observe your pool chemistry at least twice a week and during the winter at least once a week. There is no need to test the water if you winterize your pool during the winter months. Remember that algae and bacteria can still grow even when it is cold outside. Your pool should be shocked every 6 weeks or so during months.
Make sure you check the water level once every month and adjust as required. Make sure that the water level is at the middle of the skimmer. Poor water circulation and movement will be the results if the water level is too high.
There should be regular scrubbing of walls and tiles. If you want to eliminate algae, then you need to scrub your walls regularly. You can have money savings if your tiles are always clean. Algae likes to stick to walls and steps. Always clean your walls and steps of algae.
It is important to replace all broken or misplaced drains and suction supplies. This is an important part of swimming pool maintenance. A leak at the suction side of the pump will make it suck air into the system. If you need to gauge this, you should run the equipment and look at the water coming out of your return lines. If there are a lot of air bubbles, there may be excessive air getting into the system Too much air coming into the system will make your pump dry and freeze. There is a need of replacement which can be very expensive.
The pH level should not go above 8.0. The pH of the pool should always be checked so that the maximum potential of the chlorine in the pool can be used. Below 7.2 pH, the chlorine will not longer be as effective. Even if you add more chlorin, you will not benefit from it in the same way. This results in throwing away money.